BLUETTI RV5 · All-in-One RV Solar Power Hub
One Hub Replaces Six Separate RV Power Components
The RV5 Power Hub consolidates an inverter, inverter charger, solar controller, alternator charger, DC system, and protection unit into a single integrated platform — 5,000W of continuous AC output (10,000W surge) and 1,620W of DC output. Pre-labeled wiring and an auto-recognition design mean most RV owners can install it with basic DIY skills, no electrician required. Rated IP65, vibration-resistant, and built to run under 50dB. Backed by a 5-year manufacturer’s warranty.
Pick Your Power Tier
The Power Hub itself doesn’t include a battery — BLUETTI sells it standalone or bundled into larger kits.
Hub Only
RV5 Power Hub
Just the hub — for van conversions and custom builds where a battery is sourced separately.
~5kWh
RV5 + B4810
Hub plus one 5,120Wh battery — fast, simple install with limited run time.
~5kWh
5kWh RV Kit
Adds an Epanel and Epad to the RV5+B4810 setup, for full monitoring and control.
~10kWh
10kWh RV Kit
Two batteries, Epanel, and Epad — built for full-time RVers and extended off-grid trips.
What Makes the RV5 Different
5,000W Continuous, 10,000W Surge
Runs A/C, microwave, fridge, and electronics at once, with enough surge headroom for high-startup appliances.
Replaces Six Separate Components
Inverter, inverter charger, solar controller, alternator charger, DC system, and protection unit in one platform.
No Electrician Required
Pre-labeled wiring and an auto-recognition design let most RV owners install it with basic DIY skills.
1,800W Solar, 1,200W Alternator
Plus up to 5,000W from shore power — 0 to 80% in about 50 minutes on shore power.
IP65, Vibration-Resistant
Built for the road — rough highways, long travel days, and the general wear of RV life.
Under 50dB, ~7W Standby
Quiet enough to run in the background without the drone of a generator, with minimal idle power draw.
Epad Touchscreen + App Control
Monitor battery status, power usage, and charging inputs from one HD touchscreen or the BLUETTI app.
5-Year Warranty
UL458-certified hardware backed by long-term coverage on defects in materials and workmanship.
Stop Building Your RV Solar System Piece by Piece
Most DIY RV power setups mean sourcing and wiring together a separate inverter, solar charge controller, alternator charger, DC converter, and protection circuitry — a project that can take days and leaves plenty of room for mismatched components. The RV5 folds all of that into one hub with auto-recognition design: it identifies voltage and current on its own, and pre-labeled wiring means most RV owners can get it installed with basic DIY skills, no electrician required.
Charging stays flexible on the road: up to 1,800W from solar, 1,200W from the vehicle’s alternator, or up to 5,000W from shore power (0 to 80% in about 50 minutes). One detail worth planning around — for 12V auto-leveling systems with startup currents over 100A, BLUETTI recommends pairing with a dedicated B1210 battery or the vehicle’s existing 12V lead-acid battery rather than relying on the RV5 alone. The platform’s real ceiling is higher than the marketed kits suggest, too: BLUETTI’s own spec sheet lists a maximum expansion of 122.88kWh via parallel and series battery wiring, well beyond the “10kWh” top-tier kit.
Full Specifications
RV5 Power Hub
Output
| Continuous AC output | 5,000 W |
| Surge power | 10,000 W |
| DC output | 1,620 W |
| System voltage | 48V |
| Max input/output current | 150 A |
Charging Input
| Shore power | Up to 5,000W, 120V/42A |
| Solar | Up to 1,800W, 12–50V |
| Alternator (12V / 24V) | 600W / 1,200W, 50A max |
| 0–80% via shore power | ~50 minutes |
Durability & Environment
| Protection rating | IP65 |
| Noise | <50 dB |
| Standby power draw | ~7 W |
| Operating temp | -4–131°F |
| Storage temp | -4–104°F |
| Humidity | 95% max |
Physical & Warranty
| Weight | 30.86 lbs |
| Dimensions (L×W×H) | 17.72 × 19.69 × 6.30 in |
| Max system expansion | 122.88kWh (24P, parallel/series) |
| Certification | UL458 |
| Warranty | 5 years |
B4810 Battery (sold separately / bundled in kits)
Capacity
| Rated capacity | 5,120 Wh (51.2V, 100Ah) |
| Chemistry | LiFePO₄ |
| Cycle life | 6,000 cycles @ 70% capacity |
Physical
| Weight | 101.4 lbs |
| Protection rating | IP65 |
What’s In the Box
- RV5 Power Hub×1
- M8 wood screw×8
- Anchor×8
- Drilling template×1
- User manual×1
No battery is included with the Power Hub alone — see the kit tiers above for bundled options with a B4810 battery, Epanel, and Epad.
Common Questions
How “plug-and-play” is the RV5 system? Do I need an electrician?
The RV5 is designed for quick, beginner-friendly setup. With pre-labeled wiring and a simplified design, most RV owners can install it with basic DIY skills — no electrician required.
Does the Power Hub include a battery?
No — the RV5 Power Hub is sold on its own, or bundled with a B4810 battery (and optionally an Epanel and Epad) in the 5kWh and 10kWh RV Kits.
How does the RV5 work with a 12V system?
For 12V auto-leveling systems with startup currents over 100A, BLUETTI recommends pairing with a dedicated B1210 battery or the vehicle’s existing 12V lead-acid battery, rather than relying on the RV5 system alone.
How is the system monitored?
Through the Epad — an HD touchscreen showing power consumption, battery status, and charging inputs in real time — or remotely through the BLUETTI app.
How much can this system scale up to?
The marketed kits top out at “10kWh,” but the Power Hub’s own spec sheet lists a maximum expansion of 122.88kWh through parallel and series battery wiring — well beyond what the standard kits offer.
What’s the warranty?
5 years on the Power Hub, covering defects in materials and workmanship.
Reviews
There are no reviews yet.