Power Station Kit · 7,200W · 6,144Wh
2× Anker SOLIX F3000 + Double Voltage Hub + Power Saver Kit
2× Anker SOLIX F3000 + Double Voltage Hub + Power Saver Kit: 2× F3000 + Double Voltage Hub + Power Saver Kit – 7,200W of output and 6,144Wh of LiFePO4 storage.
2× Anker SOLIX F3000 + Double Voltage Hub + Power Saver Kit
This kit combines 2× Anker SOLIX F3000 Portable Power Station, Anker SOLIX Double Voltage Hub (for F3000) and Anker SOLIX Power Saver Kit (Smart Meter + Bi-Directional Inlet Box). The Anker SOLIX F3000 is a UL9540-certified 3,072Wh LiFePO4 power station with 3,600W output (7,200W surge), 2,400W dual-MPPT solar input and expansion to 24kWh.
Two stations are linked through the hub for split-phase 120V/240V output, so 240V appliances and a manual transfer switch can be fed without an electrician-installed inverter.
The Power Saver Kit stores off-peak or solar energy and releases it into the home circuit during peak hours to trim the utility bill.
Browse all Anker SOLIX power stations, Anker solar generator kits, expansion batteries and Anker solar panels.
2× Anker SOLIX F3000 + Double Voltage Hub + Power Saver Kit Features
3,600W pass-through charging
Recharge at full speed while powering appliances – no shutdown needed.
Ultra-low idle draw
Up to 5 days of AC standby, or 2 days of cooling for an 8 cu ft refrigerator on one charge.
2,400W dual-MPPT solar
60V and 165V inputs recharge the F3000 in under 2 hours of good sun with portable or rigid panels.
120V or 240V
Run 120V essentials from one unit, or pair two with the Double Voltage Hub for 240V / 7,200W.
Expandable to 24kWh
Add up to three BP3000 batteries per station for a week of backup, ITC tax-credit eligible.
6,000W hybrid recharging
Combine a fuel generator and solar for the fastest recharge (expansion battery required).
240V from two F3000s
Links two stations into a 7,200W split-phase supply for dryers, well pumps and a transfer switch.
Store cheap or free energy
Charge the F3000 from solar or off-peak grid power and discharge it into the house at peak rates.
Real-time AI monitoring
The smart meter reads household draw every 15 seconds and steers stored energy where it is needed.
What’s in the Box
- 2×Anker SOLIX F3000 Portable Power Station
- 2×AC charging cable
- 2×High-voltage solar charging cable
- 2×User manual
- 2×120V Generator Input Adapter (A17D1111) – free with every F3000
- 1×Anker SOLIX Double Voltage Hub
- 1×Anker SOLIX Bi-Directional Inlet Box
- 1×Anker SOLIX Smart Meter
- 2×200A current transformer
- 2×50A current transformer
- 1×Extendable antenna and manuals
2× Anker SOLIX F3000 + Double Voltage Hub + Power Saver Kit FAQ
Can I charge the F3000 from a gas generator?
Yes. The 120V Generator Input Adapter connects the F3000 to a 120V generator for up to 3,600W of pass-through charging – and it is included free with every F3000 ordered from Eco Solar Kits.
Does the F3000 need an electrician for home backup?
No electrician is needed to use the station on its own or with the Double Voltage Hub. A manual transfer switch or the Power Saver Kit must be installed by a licensed electrician.
How long does it run a refrigerator?
About 42 hours for a 190W (8 cu ft) refrigerator on the base 3,072Wh, and roughly double with one BP3000 expansion battery.
How long will 6,144Wh run my home essentials?
Around 26 hours for a 200W load such as a refrigerator, router and a few lights, and roughly 5.2 hours for a steady 1,000W load.
Does it ship free?
Yes – free shipping within the contiguous USA and no sales tax in most states. Large kits may ship in several boxes that can arrive on different days.
2× Anker SOLIX F3000 + Double Voltage Hub + Power Saver Kit Specifications
2× Anker SOLIX F3000 Portable Power Station
| Battery | |
| Battery type | LFP (LiFePO4) |
| Cell capacity | 51.2V / 60Ah / 3,072Wh |
| Cycle life | 4,000 cycles |
| Expandable capacity | Up to 3 × BP3000 per unit (12.3kWh); 2 units: 24kWh |
| Input | |
| AC input (charging cable) | 120V~ 15A max (<3 hrs), 1,800W max, 12A continuous |
| AC input (bi-directional inlet box) | 120V~ 15A max, 1,800W max |
| AC input (TT-30 cable + EV adapter) | 120V~ 30A max, 3,600W max, 24A continuous |
| AC input (EV charging adapter, J1772) | 240V~ 15A max, 3,600W max |
| High-PV input | 11-165V⎓17A max, 1,600W |
| Low-PV input | 11-60V⎓17A max, 800W |
| DC input port | 60V⎓120A max |
| Output | |
| AC output (NEMA 5-20R) | 120V~ 20A max, 2,400W max per outlet, 3,600W total |
| SurgePad power | 4,860W |
| AC surge power | 7,200W |
| AC output (TT-30R) | 120V~ 30A max, 3,600W max |
| AC output (Double Voltage Hub) | 240V~ 30A max, 7,200W max |
| Car socket | 12V⎓10A |
| Anderson DC output | 13.4V⎓30A |
| USB-A output | 5V⎓2.4A, 12W max per port |
| USB-C output | 100W max per port |
| UPS | 20 ms |
| General | |
| Discharging temperature | -4°F to 104°F |
| Charging temperature | 32°F to 104°F |
| Dimensions | 25.6 × 11.8 × 14.8 in |
| Net weight | 91.5 lb |
| Warranty | 5 years |
Anker SOLIX Double Voltage Hub (for F3000)
| Double Voltage Hub | |
| Output | 240V~ 30A, 7,200W (2 × F3000) |
| Compatible | 2 × Anker SOLIX F3000 |
| Installation | Plug-and-play, no electrician |
Anker SOLIX Power Saver Kit (Smart Meter + Bi-Directional Inlet Box)
| Power Saver Kit | |
| Bi-directional inlet box | 120V~ 15A, 1,800W in / 1,800W out, UL1741 |
| Smart meter | AI energy monitoring every 15 seconds; 2 × 200A and 2 × 50A current transformers, extendable antenna |
| Savings | Up to $1,560 per year on a time-of-use plan (Anker estimate) |
| Compatible | Anker SOLIX F3000 |
Reviews
There are no reviews yet.